Wednesday, August 15, 2012

LIST OF NFPA CODES,NFPA CODES AND STANDARDS
















HOT RODS AND CONSTRUCTION EQUPMENT HYDRAULICS


NFPA  CODES AND STANDARDS:  FOR CYLINDERS






www.m.georgiahydraulics.com





NFPA/T3.6.11 R2-200x, Fluid power systems and components – Cylinder bore and rod size combinations – Rod end configurations, dimensional identification code – Mounting dimensions for bore sizes less than 1 1/2 inch bore cataloged square head tie rod type

NFPA/T3.6.58-200x, Hydraulic fluid power – Cylinders – External sealing system performance – Test method

NFPA/T3.19.12M-1982 (R2007), Hydraulic fluid power – Reciprocating dynamic sealing devices in linear actuators – Method of testing, measuring and reporting leakage

NFPA/T3.6.1-1984 (R2009), Fluid power systems and products – Cylinder bores and piston rod diameters – Inch series

NFPA/T3.6.11 R1-1998 (R2009), Fluid power systems and components – Cylinder bore and rod size combinations – Rod end configurations, dimensional identification code – Mounting dimensions for bore sizes less than 1 1/2 inch bore cataloged square head tie rod type

NFPA/T3.6.29 R2-2000 (R2009), Tie rod or bolted cylinder – Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a tie rod or bolted cylinder

NFPA/T3.6.31 R2-2000 (R2009), Telescopic cylinders and cylinders of non-bolted end construction – Pressure rating supplement to

 NFPA/T2.6.1 R2-2000 – Fluid power components – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a telescopic and nonbolted end fluid power cylinder
NFPA/T3.6.37 R1-2010, Hydraulic fluid power - Cylinders - Method for determining the buckling load
NFPA/T3.6.54 R1-1997 (R2009), Hydraulic fluid power – Cylinder ports – SAE straight thread O-ring and four-bolt flange ports – ISO straight thread O-ring and four-bolt flange ports – Heavy duty and light duty square head tie rod cylinders
NFPA/T3.6.59-1993 (R2007), Hydraulic fluid power – Cylinders – Cushion performance
NFPA/T3.6.68-2010, Fluid power - Square head cylinders - Determination of the static failure pressure rating of pressure containing components
NFPA/T3.6.7 R3-2009 (R2012), Fluid power systems and products -- Square head industrial cylinders -- Mounting dimensions
NFPA/T3.6.8 R3-2010, Fluid power systems - Cylinders - Dimensions for accessories for cataloged square head industrial types 
NFPA/T3.6.17-1971 (R2004), Port nominal pipe sizes for merged inch and metric series cataloged square head industrial pneumatic fluid power cylinders
NFPA/T3.6.29 R1-1996, Tie rod or bolted cylinder pressure rating supplement to

NFPA/T2.6.1 R1-1991, Fluid power systems and products – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a tie rod or bolted cylinder
NFPA/T3.6.36-1978 (R1984), A bibliography of fluid power cylinder standards
NFPA/T3.6.36 R1-2000, Information report – Bibliography – Fluid power cylinder standards (second edition)
NFPA/T3.6.36 R2-2002, Information report – Bibliography – Fluid power cylinder standards (third edition)
NFPA/T3.6.36 R3-2005, Information report – Bibliography – Fluid power cylinder standards (fourth edition)
NFPA/T3.6.64-1998 (R2004), Recommended practice for application guidelines for cylinders
NFPA/T3.6.8 R1-1984, Fluid power systems – Cylinders – Dimensions for accessories for catalogued square head industrial types (second edition)
ANSI/(NFPA)T3.6.29 R2-2000 (R2006), Tie rod or bolted cylinder – Pressure rating supplement to

NFPA/T2.6.1 R2-2000, Fluid power components – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a tie rod or bolted cylinder
ANSI/(NFPA)T3.6.31 R2-2000 (R2006), Telescopic cylinders and cylinders of non-bolted end construction – Pressure rating supplement to NFPA/T2.6.1 R2-2000 – Fluid power components – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a telescopic and nonbolted end fluid power cylinder
ANSI/(NFPA)T3.6.37-1991 (R1998), Hydraulic fluid power – Cylinders – Method for determining the buckling load
ANSI/(NFPA)T3.6.59-1993 (R2007), Hydraulic fluid power – Cylinders – Cushion performance
ANSI/(NFPA)T3.6.68.1-200x, Fluid power systems - Static pressure rating methods of square head fluid power cylinders -- Part 1: Pressure containing components
ANSI/(NFPA)T3.6.7 R2-1996 (R2004), Fluid power systems and products – Square head industrial cylinders – Mounting dimensions
ANSI/B93.1-1964 (R1994), Dimension identification code for fluid power cylinders
ANSI/B93.10-1969 (R1996), Static pressure rating methods of square head fluid power cylinders – Part 2: Pressure containing components
ANSI/B93.104M-1987 (R1994), Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series – Mounting dimensions for accessories
ANSI/B93.105M-1987 (R1994), Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series – Tolerances
ANSI/B93.106M-1987 (R1994), Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium series – Port dimensions
ANSI/B93.107M-1987 (R1994), Hydraulic fluid power – Single rod cylinders, 250 bar (25 MPa) series – Port dimensions
ANSI/B93.108M-1987, Hydraulic fluid power - Single rod cylinders, 160 bar (16 MPa) compact series - Port dimensions
ANSI/B93.109M-1987, Pneumatic fluid power - Cylinders, 10 bar (1 000 kPa) series - Rod end spherical eyes - Mounting dimensions
ANSI/B93.110M-1987, Pneumatic fluid power - Cylinders, 10 bar (1 000 kPa) series - Rod end clevis - Mounting dimensions
ANSI/B93.111M-1987 (R1994), Fluid power systems and components – Cylinders – Housings for rod wiper rings in reciprocating applications – Dimensions and tolerances
ANSI/B93.34-1973 (R1988), Bore and rod size combinations, rod end configurations, dimensional identification code, and mounting dimensions for 3/4 and 1 1/18 inch bore cataloged square head tie rod type industrial fluid power cylinders
ANSI/B93.56M-1982 (R1996), Fluid power systems and products – Cylinders – Basic series of piston strokes
ANSI/B93.61M-1982 (R1997), Fluid power systems and products – Cylinders – Piston rod thread dimensions and types
ANSI/B93.62M-1982 (R2007), Hydraulic fluid power – Reciprocating dynamic sealing devices in linear actuators – Method of testing, measuring and reporting leakage
ANSI/B93.8-1968 (R2001), Bore and rod size combinations and rod end configurations for cataloged square head industrial fluid power cylinders
ANSI/B93.84M-1987 (R1987), Fluid power systems and components – Cylinders – Identification code for mounting dimensions and mounting types
ANSI/B93.88M-1987 (R1994), Pneumatic fluid power systems – Cylinder barrels – Requirements for non-ferrous metallic tubes
ANSI/B93.89M-1987 (R1994), Hydraulic fluid power – Single rod cylinders – Mounting dimensions – 250 bar (25 000 kPa) series
ANSI/B93.93M-1987 (R1994), Hydraulic fluid power – Cylinders – Piston seal housings incorporating bearing rings – Dimensions and tolerances
ANSI/(NFPA)T3.6.8 R2-2007, Fluid power systems – Cylinders – Dimensions for accessories for cataloged square head industrial types (third edition)
ISO/PDTS 13725 (R), Hydraulic fluid power - Cylinders - Method for determining the buckling load [revision of ISO TS 13725:2001]

ISO/AWI 10761, Fluid power systems – Cylinders – Mounting dimensions for 400 bar cylinders
ISO/AWI 16803, Hydraulic fluid power – Hydraulic double rod cylinders based on ISO 10762 – Mounting dimensions
ISO/AWI 16807, Hydraulic fluid power – Hydraulic double rod cylinders based on ISO 6020-2 – Mounting dimensions
ISO/WD 16801, Hydraulic fluid power – Hydraulic double rod cylinders based on ISO 6020-1 – Mounting dimensions
ISO/WD 16849, Pneumatic fluid power – Cylinders – Endurance tests and acceptance criteria
ISO/AWI 3320 (R), Fluid power systems and components – Cylinder bores and piston rod diameters and area ratios – Metric series (revision of ISO 3320:1987]
ISO/CD 19973-3 (R), Pneumatic fluid power – Assessment of component reliability by testing – Part 3: Cylinders with piston rod [revision of ISO 19973-3:2007]
ISO/CD 10762-1, Hydraulic fluid power – Single rod cylinders – 6,3 MPa (63 bar) series – Mounting dimensions
ISO/CD 8141, Hydraulic fluid power – Mounting dimensions for compact single rod cylinders, 16 MPa (160 bar) series, with bores from 250 mm to 500 mm (became ISO 6020-3)
ISO/DP 8134, Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) compact series – Rod end spherical eyes and pivot pin – Mounting dimensions (combined with ISO 8133)
ISO/CD 4395-2 (R), Fluid power systems and components – Cylinder piston rod thread dimensions and types – Part 1: Pneumatic (revision in part of ISO 4395:1978)
ISO/CD 6982 (R), Hydraulic fluid power – Cylinders – Rod end spherical eyes – Mounting dimensions (revision of ISO 6982:1992)
ISO/DIS 6195 (R), Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances (revision of ISO 6195:2002)
ISO/DIS 6981 (R), Hydraulic fluid power – Cylinders – Mounting dimensions of rod end plain eyes (revision of ISO 6981:1992)
ISO 4395:2009, Fluid power systems and components – Cylinder piston rod end types and dimensions (second edition)
ISO 5597:2010, Hydraulic fluid power -- Cylinders -- Dimensions and tolerances for housings for single-acting piston and rod seals in reciprocating applications [second edition]
ISO 6022:2006, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6099:2009, Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types (fourth edition)
ISO 8132:2006, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series – Mounting dimensions for accessories
ISO 8139:2009, Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
ISO 8140:2009, Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevis (third edition)
ISO/TR 16806:2003, Pneumatic fluid power – Cylinders – Load capacity of pneumatic slides and their presentation method
ISO 15524:2011, Pneumatic fluid power – Cylinders – Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
ISO 13726:2008, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm – Accessory mounting dimensions (second edition)
ISO 3321:1975, Fluid power systems and components – Cylinder bores and piston rod diameters – Inch series
ISO 6020-1:2007, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 1: Medium series (third edition)
ISO 6020-3:1994, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6432:1985, Pneumatic fluid power – Single rod cylinders – 10 bar (1000 kPa) series – Bores from 8 to 25 mm – Mounting dimensions
ISO 8133:2006, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series – Mounting dimensions for accessories
ISO 10766:2006, Hydraulic fluid power – Cylinders – Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (second edition)
ISO 19973-3:2007, Pneumatic fluid power – Assessment of component reliability by testing – Part 3: Cylinders with piston rod
ISO 6020-2:2006, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 2: Compact series
ISO 6195:2002, Fluid power systems and components – Cylinder-rod wiper-ring housings in reciprocating
applications – Dimensions and tolerances (second edition)
ISO 10099:2001, Pneumatic fluid power – Cylinders – Final examination and acceptance criteria (second edition)
ISO 10100:2001, Hydraulic fluid power – Cylinders – Acceptance tests (second edition)
ISO 10762:1997, Hydraulic fluid power – Cylinder mounting dimensions – 10 MPa (100 bar) series
ISO 15552:2004, Pneumatic fluid power – Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm – Basic, mounting and accessories dimensions
ISO 16656:2004, Hydraulic fluid power – Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) – Mounting dimensions
ISO 21287:2004, Pneumatic fluid power – Cylinders – Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
ISO 3320:1987, Fluid power systems and components – Cylinder bores and piston rod diameters – Metric series (second edition)
ISO 4393:1978, Fluid power systems and components – Cylinders – Basic series of piston strokes
ISO 4394-1:1980, Fluid power systems and components – Cylinder barrels – Part 1: Requirements for steel tubes with specially finished bores
ISO 6430:1992, Pneumatic fluid power – Single rod cylinders, 1000 kPa (10 bar) series, with integral mountings, bores from 32 to 250 mm – Mounting dimensions (second edition)
ISO 6537:1982, Pneumatic fluid power systems – Cylinder barrels – Requirements for non-ferrous metallic tubes
ISO 6547:1981, Hydraulic fluid power – Cylinders – Piston seal housings incorporating bearing rings – Dimensions and tolerances
ISO 7181:1991, Hydraulic fluid power – Cylinders – Bore and rod area ratios (second edition)
ISO 7425-1:1988, Hydraulic fluid power – Housings for elastomer-energized, plastic-faced seals – Dimensions and tolerances – Part 1: Piston seal housings
ISO 7425-2:1989, Hydraulic fluid power – Housings for elastomer-energized, plastic-faced seals – Dimensions and tolerances – Part 2: Rod seal housings
ISO 10099:1990, Pneumatic fluid power – Cylinders – Acceptance test
ISO 10100:1990, Hydraulic fluid power – Cylinders – Acceptance test
ISO 10766:1996, Hydraulic fluid power – Cylinders – Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 13726:1998, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 to 500 mm – Accessory mounting dimensions
ISO 3322:1985, Fluid power systems and components – Cylinders – Nominal pressures (second edition)
ISO 4395:1978, Fluid power systems and components – Cylinders – Piston rod thread dimensions and types
ISO 5597:1987, Hydraulic fluid power – Cylinders – Housings for piston and rod seals in reciprocating applications – Dimensions and tolerances
ISO 6020-1:1981, Hydraulic fluid power – Single rod cylinders – Mounting dimensions – 160 bar (16 000 kPa) series –Part 1: Medium series
ISO 6020-1:1998, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 1: Medium series (second edition)
ISO 6020-2:1991, Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 2: Compact series (second edition)
ISO 6022:1981, Hydraulic fluid power – Single rod cylinders – Mounting dimensions – 250 bar (25 000 kPa) series
ISO 6099:1985, Fluid power systems and components – Cylinders – Identification code for mounting dimensions and mounting types (second edition)
ISO 6099:2001, Fluid power systems and components – Cylinders – Identification code for mounting dimensions and mounting types (third edition)
ISO 6195:1986, Fluid power systems and components – Cylinders – Housings for rod wiper rings in reciprocating applications – Dimensions and tolerances
ISO 6431:1992, Pneumatic fluid power – Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 to 320 mm – Mounting dimensions (second edition)
ISO 6981:1992, Hydraulic fluid power – Cylinders – Rod end plain eyes – Mounting dimensions (second edition)
ISO 6982:1992, Hydraulic fluid power – Cylinders – Rod end spherical eyes – Mounting dimensions (second edition)
ISO 7180:1986, Pneumatic fluid power – Cylinders – Bore and port thread sizes
ISO 8131:1992, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series – Tolerances (second edition)
ISO 8132:1986, Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series – Mounting dimensions for accessories
ISO 8133:1991, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series – Accessory mounting dimensions
ISO 8135:1986, Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series – Tolerances
ISO 8135:1999, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series – Tolerances (second edition)
ISO 8136:1986, Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) medium series – Port dimensions
ISO 8137:1986, Hydraulic fluid power – Single rod cylinders, 250 bar (25 MPa) series – Port dimensions
ISO 8138:1986, Hydraulic fluid power – Single rod cylinders, 160 bar (16 MPa) compact series – Port dimensions
ISO 8138:1998, Hydraulic fluid power – Single rod cylinders, 16 MPa (160 bar) compact series – Port dimensions (second edition)
ISO 8139:1991, Pneumatic fluid power – Cylinders, 1000 kPa (10 bar) series – Rod end spherical eyes – Mounting dimensions (second edition)
ISO 8140:1991, Pneumatic fluid power – Cylinders, 1000 kPa (10 bar) series – Rod end clevis – Mounting dimensions (second edition)
ISO/TS 13725:2001, Hydraulic fluid power – Cylinders – Method for determining the buckling load (Technical Specification)













Favicon Generator and Gallery

No comments: